Fixr puts freestanding electric units at $70–$1,870 and the national installed average at $750. A plug-in model needs no venting: unbox it and place it. Real installation cost appears when you recess it, add a 240V circuit or build a custom surround. Check the outlet circuit first so you do not pay for “installation” you do not need.
Fireplace Cost: Price the Unit, Venting and Chimney Before You Compare Totals
Same fireplace, quotes thousands apart. Separate unit, venting or chimney, gas or electrical work, surround and permits before comparing totals.
Six real-world scopes: where the money actually goes
Ranges are published U.S. figures, covering common equipment and labor but not luxury finishes, structural repair or a second problem found after the wall is opened. Sources: Fixr Fireplace Installation (updated Jan 22, 2026), Gas Fireplace and Electric Fireplace (updated Jan 31, 2025). All figures USD. The total in item 6 is derived from Fixr's mantel, hearth and surround unit prices for a typical area, not a single published total. Use local itemized quotes for your market.
Fixr lists built-in electric fireplaces at $2,000–$10,000, recessed units at $146–$989, and electricians at $52–$97/hour. Ask for the quote split into unit, wall opening and framing, dedicated or 240V circuit, and surround/finish. If it says “installation included”, confirm whether drywall, paint and trim repair are in it.
Fixr's installation guide puts gas fireplaces at $2,500–$10,000; its gas-specific guide shows wider projects at $3,558–$14,609 (average $9,084). The first branch is vented vs ventless, whether a gas line already exists, and whether a new flue is needed. Confirm the vent path on site before choosing a unit; a cheap firebox may not fit the wall or the flue.
Fixr puts gas inserts at $1,892–$5,102. They are a good fit for an old wood-burning fireplace, but they do not just drop in: measure the firebox, inspect the flue and clearances, and expect a stainless liner or chimney repair on many jobs. Relining commonly runs about $750. Scope the chimney with a camera before choosing an insert over a rebuild.
Fixr puts wood-burning fireplaces at $2,500–$30,000, lists a new chimney at $4,000–$8,000 and removal of an old fireplace at about $4,500. This is the most expensive path: foundation, framing, flue, hearth, clearances and permits all add cost. Unless you specifically want a real fire and masonry look, compare the all-in price with direct-vent gas or electric first.
Fixr lists mantels at $446–$11,940, hearths at $182–$645 and surround material at $2.50–$300 per square foot. Adding a hearth and area-priced surround, a typical project totals about $500–$12,000; that total is derived, not a single Fixr figure. This suits a fireplace that works but looks dated. Do not reverse the order: inspect venting, chimney and electrical first, then buy stone.
Eight questions to ask before you sign
Why can “gas fireplace installation” quote anywhere from $2,500 to $14,609?
Compare scope first: replacement or new build? Existing gas line? Direct-vent or ventless? Does it include a flue liner, mantel, hearth, permit and old-unit removal? Fixr's installation guide gives $2,500–$10,000, while its gas-specific guide shows wider projects at $3,558–$14,609. Put both bids into the same eight lines before comparing totals.
An electric fireplace needs no venting, so why is installation $750?
A plug-in unit needs no installation; the $750 figure is a national average that includes an electrician's wiring. Recessing, hardwiring, adding a 240V circuit and custom finishing all create labor. Fixr puts electric installation at a $750 average and a $540–$1,005 common range, with electricians at $52–$97/hour. Confirm whether you bought plug-in or hardwired before paying for installation.
Can I put a gas or electric insert into an old wood-burning fireplace?
Not always. Measure the firebox width, height and depth, then check clearances and venting: most gas inserts need a liner, while an electric insert needs enough depth and a power source. If the old chimney is cracked, unlined or blocked, repair it first. Fixr lists gas inserts at $1,892–$5,102, electric log inserts at $107–$435 and electric firebox inserts at $161–$1,579. Do not use a box price to guess the retrofit cost.
Does the chimney have to be rebuilt?
Usually not. Start with a camera inspection. If the joints, liner, crown and flashing are serviceable, a sweep or local repair may be enough; when a continuous liner is needed, Fixr puts relining at about $750. Consider a new chimney only for structural damage, no suitable flue or a height change; Fixr lists $4,000–$8,000. Inspect first instead of accepting “it must be rebuilt”.
What is most often missing from a fireplace quote?
Venting or a flue liner, gas or electrical work, mantel/hearth/finish, permit and inspection, old-unit removal and disposal, and drywall/paint/trim after the work. Fixr lists gas lines at $500–$2,500, electrical at $175–$500, chimneys at $4,000–$8,000 and removal at about $4,500 because these are the items that appear later. Require a line-item scope before signing; do not accept “we'll figure it out later”.
Do I need a permit to install a fireplace?
Gas, wood-burning, electrical or structural work usually does; a plug-in unit or cosmetic change often does not, but rules vary by jurisdiction. The local building department sets both the permit and the final inspection, and fees vary. Do not accept “it's too small to permit” from a contractor. Unpermitted gas or wood work can be ordered removed at resale or during an insurance claim. Ask the AHJ before signing.
Wood or gas: which is cheaper over time?
There is no single answer; split the decision into install and operating costs. Wood has the highest install ceiling (Fixr: $2,500–$30,000) plus sweeping, firewood and ash; gas commonly runs $2,500–$10,000, is convenient and has no ash, but still needs annual service. A traditional open wood fireplace is inefficient and can pull warm room air up the flue. Treat either as supplemental heat, not whole-house savings.
What should I do before buying anything?
Do three things first: photograph and measure the existing fireplace, chimney, gas meter and electrical panel; decide whether this is an insert, a replacement or a new build; and get three itemized quotes compared on the same sheet. Do not buy the unit before the vent path, clearances and electrical are confirmed, or a bargain firebox may not fit. Put the six lines—unit, venting, gas/electrical, finish, permit and removal—into the contract before paying a deposit.
Popular topics
Start with the 2 most-read topics, or search everything.
Start here
Don't get lost: start with the picks, then expand by topic.
All content
Filter by keyword; each guide has steps, common mistakes and a checklist.
How to use this site
Pick a real problem
Start from a recommendation or search, not the first page; find the problem you need to solve now.
Follow the steps
Each guide gives steps, common mistakes and a checklist; do the smallest step first, then iterate.
Review with the checklist
Check your work with the checklist; drop what does not fit and keep the repeatable process.
Why read this
Not vague concepts
Every guide lands on steps, templates, mistakes and a checklist you can actually use.
No invented results
No promises of income, traffic or admission; professional topics state limits and point to experts.
Kept updated
Last updated 2026.11.03; content grows from feedback instead of one-off empty pages.
Affiliate disclosure: this page may contain affiliate links. We may earn a commission if you buy through them, at no extra cost to you.